When you are looking for the best way to protect your home, there are many options available. One of the most popular is a sump pump system. These pumps remove water that has collected in your basement or crawl space and send it outside. Installing one is not very difficult, but it requires you to think about where you will install the main pump and how it will be connected.
Tips For Installing Sump Pumps
Plan in Advance
This is the most important part of the process. You need to think about where you are going to place your pump in advance because this will determine how easy it is for you to install it later on. Also, when deciding upon a location, be sure that the power cord can reach an outlet.
When you plan in advance, you will be able to make sure that your pump is sturdy and safe.
Clean the Installation Area
Before you begin, make sure the area is clean. This will help to ensure that there are no dirt particles or debris left behind after you drill into your floor. You should also check for any obstructions in the space, such as pipes or wires, before installing this pump system because these can cause problems with its operation later on.
Protect Belongings
This is another important step. When the water is removed from your basement, it will go out of the sump pump hole and onto the ground outside. This means that you need to protect any belongings below this area so they do not get damaged by flooding or excessive moisture levels in your home.
Drill a Hole that Fits the Pump
You need to make sure the hole you drill is big enough for your pump size. The best way to do this is by using a tape measure and inserting it through the existing hole in your sump basin so that it reaches all of the components below. Mark on the outside where each area starts, then use a pencil or marker to mark these areas inside as well. This will give you an idea of how large of a hole needs to be drilled from above. If there are any obstructions present on either side of your desired location, try moving around until you find an open slot without anything blocking access directly under where it should go.
Don’t Forget Sump Pumps are Loud
It is very important that you remember this fact. The pump will move large volumes of water quickly, which means it can be loud during operation. This is part of the reason why it must go outside rather than inside your home or crawl space.
Always Install a Weep Hole below the Check Valve to Prevent Lockouts
You need to remember this if you want the pump system to function properly. The check valve will prevent water from moving back into your sump basin automatically, but it can sometimes stick or become clogged. You should drill a weep hole below this spot so that excess moisture is released and does not build up inside the pump chamber. This way, you do not have to worry about anything damaging your equipment later on due to excessive amounts of condensation being present within its inner workings.
Have the Line Camera Inspected Before Tying the Outlet into the Drain Line
One of the last steps you will need to take is connecting your main sump pump outlet into a drain line. This should be done by tying it directly into the existing drain pipe underneath your home so that water can flow out through this connection and avoid any problems with flooding. Before doing anything else, have an inspection performed to make sure there are no obstructions present in these lines, such as tree roots or debris, which could cause damage to the pump.
Choosing the Right Sump Pump
There are many different sump pumps available in the market today, and choosing the best one for your home can be difficult. However, there are some things you should keep in mind when searching for this equipment These things will make it much easier to find the right one without having to spend a lot of time doing research or making unnecessary mistakes. They include:
- Horsepower (HP)
Consider how much water needs to be moved, and purchase a pump that has an equal or greater amount of HP. You can consult the owner’s manual for your sump basin if you are unsure about how much water will need to pass through it on a regular basis.
- Price
You should also consider an item’s price when making this decision. This is because you do not have to spend a lot of money on one that is very high-quality. Just make sure you are getting what you pay for by choosing an item made from materials that will last long without any problems developing over time, rather than opting for the cheapest option available if it does not meet your needs or has low durability.
- Style
Finally, consider how much space there is in your crawlspace and whether or not it can support certain sump pumps based on their weight and dimensions before making this purchase decision. You should also keep in mind the space available on top of your sump basin itself, as a lot of pumps have large bases that can take up a considerable amount of room.
Sump Pump Installation
Once you have chosen the best unit for your home and received it from an online provider or local store, it will be time to install this equipment so that it is ready to go whenever you need water removed from underneath your property. This process should only take about three hours if done correctly by someone who has experience with these systems. Instead of relying on guesswork, hire a professional to do the job if you have never installed a sump pump before. Working with a professional will guarantee you the best results possible. Make sure you do through research, and only choose an experienced and skilled expert who can get the job done right the first time.